Introduction to Networking for NonStop S-Series Servers

Communications Product Concepts and
Components
Introduction to Networking for HP NonStop S-Series Servers520670-005
2-22
ServerNet Adapters
An example of an enclosure with a GESA and a FESA installed follows:
Gigabit Ethernet 4-port
ServerNet adapter
(G4SA)
Provides Gigabit connectivity between NonStop S-series
systems and Ethernet LANs. The G4SA is a multiport
adapter with a copper and fiber interface, and it is a
field-replaceable unit (FRU). The G4SA is the only LAN
adapter supported for the I/O adapter module (IOAM)
enclosure. Although the G4SA supersedes the Ethernet
4 ServerNet adapter (E4SA), Fast Ethernet ServerNet
adapter (FESA), and the Gigabit Ethernet ServerNet
adapter (GESA), it cannot be installed in a
NonStop S-series enclosure. The G4SA also provides
an open interface for an Asynchronous Wide Area
Network (AWAN) and ServerNet Wide Area Network
(SWAN) attachment to a ServerNet interconnect.
G4SA is supported by SNMP and WAN Wizard Pro.
The data transfer rate for SWAN is 10 Mbps and 10/100
Mbps for SWAN 2.
Multifunction I/O board
(MFIOB)
Provides several functions, including one Ethernet SAC
for the Ethernet port on the processor multifunction
(PMF) customer-replaceable unit (CRU). This port can
be used only by the system console. The MFIOB is a
ServerNet adapter that is integrated into the PMF CRU.
ServerNet/FX adapter Provides connectivity to an existing FOX ring. The
ServerNet/FX adapter is a field-replaceable unit (FRU).
The ServerNet/FX adapter uses the ServerNet/FX
adapter subsystem to deliver Expand-over-FOX
connectivity. Expand-over-FOX connectivity is described
in Section 5, Expand Network
.
Token-Ring ServerNet
adapter (TRSA)
Provides connectivity between NonStop S-series servers
and token-ring 802.5 LANs. It features one port per
board. The TRSA uses the SLSA subsystem to deliver
token-ring LAN access. The SLSA subsystem is
described in ServerNet LAN Systems Access (SLSA)
Subsystem on page 2-11.
Table 2-1. HP ServerNet Adapters (page 2 of 2)
Adapter Description