Introduction to NonStop Operations Management

Additional Reading
Introduction to NonStop Operations Management–125507
A-5
Section 7—Change and Configuration Management
Section 7—Change and Configuration Management
For comprehensive information on change and configuration management, refer to the
Availability Guide for Change Management.
For more information about the tools used for system configuration, refer to:
•
Distributed Name Service (DNS) Management Operations Manual
•
DSM/SCM User’s Guide
•
Himalaya S-Series Installation Guide
•
Himalaya S-Series Operations Guide
•
Himalaya S-Series Planning and Configuration Guide
•
NonStop SQL/MP Reference Manual
•
NonStop TM/MP Planning and Administration Guide
•
NonStop TM/MP Operations and Recovery Guide
•
NonStop TS/MP and Pathway Management Reference Manual
•
NonStop TS/MP and Pathway System Management Guide
•
SCF Reference Manual for G-Series Releases
•
SCF Reference Manual for the Kernel Subsystem
•
System Generation Manual for G-Series Releases
•
TSM Configuration and Management Guide
•
Transfer Installation and Management Guide
Section 8—Performance Management
For comprehensive information on performance management, refer to the Availability
Guide for Performance Management.
For information on measurement and planning tools, refer to the following manuals:
•
Enform Reference Manual
•
Flow Map Manual
•
Guardian Disk and Tape Utilities Reference Manual (for information on DSAP)
•
Guardian 90 Performance Analyzer (GPA) User’s Guide and Reference Manual
•
Kernel-Managed Swap Facility (KMSF) Manual (for information on NSKCOM)
•
Measure Reference Manual
•
Measure User’s Guide
•
NonStop TS/MP and Pathway System Management Guide
•
PEEK Reference Manual
•
SCF Reference Manual for G-Series Releases
•
Subsystem Control Point (SCP) Management Programming Manual
•
Tandem Capacity Model (TCM) Manual
•
Tandem Network Statistics Extended (NSX) Manual
•
Tandem Performance Data Collector (TPDC) Manual
•
Tandem Reload Analyzer Manual
•
Viewsys User’s Guide