Introduction to Tandem X.25 Capabilities

X25AM Connectivity
Tandem X.25 Features and Capabilities
065307 Tandem Computers Incorporated 2–25
SNAX/CM
SNAX Connection Manager (SNAX/CM) extends the support provided by SNAX/XF,
making it possible for the Tandem system to establish a call out to the remote SNA
devices over an X25AM line. SNAX/CM supports only SVCs; it does not support
PVCs. Using SNAX/CM, you can issue commands either from a terminal or an
application.
Typically, you would use an application to send either a call-request packet or a
call-disconnect packet. For example, if you want to schedule the initiation of a
particular operation at a specified time, you could use a program such as NetBatch.
You can also use SNAX/CM interactively to gather or disseminate information. That
is, an operator can issue commands to connect or disconnect lines and PUs . Refer to
the SNAX/XF Configuration and Control Manual for configuration examples.