IPX/SPX Configuration and Management Manual

NonStop™ IPX/SPX PTrace Facility
IPX/SPX Configuration and Management Manual—425731-001
4-10
File Header Record
Each description includes the time when the record is generated, the record-type code,
the text of the record, and the definitions of any values contained in the record.
File Header Record
The trace header record displays identification information specific to this trace file. The
trace header record has the following format:
Process Version String
displays the version of the NonStop™ IPX/SPX subsystem used when the trace was
taken.
Pages
displays how much space, in units of pages, is allocated in the extended data
segment used for tracing. You can specify Pages only when you start a trace, not
while you modify trace parameters. The value is an integer in the range 4 through
1024 or is equal to 0. If you omit this option or specify 0, Pages takes the default
value of 64.
Count
displays the number of trace records to be captured. Count is an integer in the
range -1 through 32767. If you omit this option, or if Count equals -1, records
accumulate until the trace is stopped.
Wrap
specifies that when the trace disk file end-of-file (EOF) is reached, trace data wraps
to the beginning of the file and overwrites any previous data.
Select
selects the operations to be traced. Refer to SELECT Command on page 4-8 for a
list of valid SELECT keywords.
Process Version String: (T0343G06^21DEC98^G06_V03_BASE)
Pages: 64
Count: 5
Wrap: False
Select: All