IPX/SPX Configuration and Management Manual

NonStop™ IPX/SPX PTrace Facility
IPX/SPX Configuration and Management Manual—425731-001
4-21
SPX Interface Trace Records
rmt
displays the address of the remote endpoint.
SPX Interface Trace Records
This subsection describes the trace records written by the SPX Protocol Layer.
State Change Trace Record
The trace record showing a state change for an SPX socket is formatted as follows:
STATE CHNG
indicates a state change for an SPX socket.
old
displays the old SPX socket state.
new
displays the new SPX socket state.
OCB
displays the IPXPROTO process open control block (OCB) index for the NonStop™
Himalaya S-series client’s OCB.
Connection Number
displays the SPX connection ID for this endpoint.
src
displays the address of this socket’s endpoint.
dest
displays the address of the remote SPX connection endpoints.
04/24/2000 15:27:47.232881 >000.000303 #232 SPX Interface
STATE CHNG: old: TS_UNBND new: TS_UNBND OCB: 3
Connection Number: 1
src: 0x00000000:000000000000:0000 dest: 0x00000000:000000000000:0000