IPX/SPX Configuration and Management Manual

Event Messages for NonStop™ IPX/SPX
IPX/SPX Configuration and Management Manual—425731-001
B-10
3: ZIPX-EVT-PROCESS-STATE-CHANGE
ZEMS-TKN-STATE-PREVIOUS
has one of the following values, depending on the previous state of the object:
ZEMS-TKN-CHANGE-REASON
has one of the following values, depending on how the action was initiated:
Event-Message Text
In the text message:
process name
indicates the name of the IPXPROTO process for which this event is generated.
change reason
indicates why the object changed states.
prev state
indicates the state that the IPXPROTO process was in before this event occurred.
curr state
indicates the state of the IPXPROTO process after this event occurred.
ZCOM-VAL-SUMSTATE-STARTING Current state is STARTING.
ZCOM-VAL-SUMSTATE-STOPPED Current state is STOPPED.
ZCOM-VAL-SUMSTATE-STOPPING Current state is STOPPING.
Value Meaning
ZCOM-VAL-SUMSTATE-ABORTING Previous state was ABORTING.
ZCOM-VAL-SUMSTATE-STARTED Previous state was STARTED.
ZCOM-VAL-SUMSTATE-STARTING Previous state was STARTING.
ZCOM-VAL-SUMSTATE-STOPPED Previous state was STOPPED.
ZCOM-VAL-SUMSTATE-STOPPING Previous state was STOPPING.
Value Meaning
ZEMS-VAL-OPERATOR-
INITIATED
Action was initiated by an operator.
ZEMS-VAL-UNDERLYING-UP Indicates the object came up because the
underlying object has come up.
ZEMS-VAL-REASON-UNKNOWN Reason for state change is unknown.
Value Meaning