IPX/SPX Configuration and Management Manual

Event Messages for NonStop™ IPX/SPX
IPX/SPX Configuration and Management Manual—425731-001
B-12
4: ZIPX-EVT-NS-BKUP-CORRUPTED
ZEMS-TKN-NAME-MANAGER
has the value ZIPX-VAL-NAME-MANAGER, identifying the manager process of
the object reported in the event.
ZIPX-TKN-NS-ERR-CAUSE
has the value ZIPX-VAL-NS-CAUSE-CHKPT-FAIL.
ZIPX-TKN-NS-ERR-ACTION
has one of the following values, depending on the recovery action to be taken:
ZIPX-TKN-NS-ERR-DETAIL
provides additional error detail, if any.
Event-Message Text
In the text message:
process name
indicates the name of the IPXPROTO process for which this event is generated.
cause string
indicates a checkpoint failure.
recovery string
indicates whether the IPXPROTO process recovered automatically. If not, specifies
either to restart the backup or stop and restart the IPXPROTO process.
Cause. NonStop™ IPX/SPX issues this message when an error occurs that causes the
backup process to become corrupted. The backup process is considered corrupted when
the primary process cannot checkpoint data to the backup process.
Effect. The backup process is running, but it is corrupted. The primary process
continues to run. The IPXPROTO process will recover automatically if possible.
Recovery. Check the recovery string for the appropriate action.
Value Meaning
ZIPX-VAL-NS-RECOV-
ABORTED
Stop and restart the IPXPROTO process when
convenient. The primary process continues to
run.
ZIPX-VAL-NS-RECOV-NORMAL IPXPROTO recovers normally by automatically
stopping and restarting the backup.
ZIPX-VAL-NS-RECOV-
RESTART
Restart the backup.