IPX/SPX Configuration and Management Manual

Error Messages for NonStop™ IPX/SPX
IPX/SPX Configuration and Management Manual—425731-001
D-2
Backup Unable to Take Over Processing
recovery string
indicates whether the IPXPROTO process was able to recover automatically. If
recovery did not occur, specifies that you should either restart the backup or stop
and restart the IPXPROTO process.
Cause. NonStop™ IPX/SPX issues this message when an error occurs that causes the
backup process to become corrupted. The backup process is corrupted when the primary
process cannot checkpoint data to the backup process.
Effect. The backup process is running, but it is corrupted. The primary process
continues to run. The IPXPROTO process recovers automatically, if possible.
Recovery. Check the recovery string for the appropriate action.
Backup Unable to Take Over Processing
process name
indicates the name of the IPXPROTO process for which this event is generated.
cause string
indicates that the backup process cannot recover.
recovery string
specifies that you should restart the IPXPROTO process.
Cause. NonStop™ IPX/SPX issues this message when the backup process cannot take
over processing.
Effect. The IPXPROTO process is aborted.
Recovery. Restart the IPXPROTO process.
Unable to Start Backup
process name NonStop™ processing error. The backup process
was unable to take over processing. The process is aborted.
Cause: cause string
[ Action: recovery string ]
process name NonStop™ processing error. Unable to start the
Backup process.
Cause: cause string
Error detail: err num
[ Action: recovery string ]