IPX/SPX Configuration and Management Manual

Error Messages for NonStop™ IPX/SPX
IPX/SPX Configuration and Management Manual—425731-001
D-6
Socket Error
Effect. The state is something other than available or unavailable.
Recovery. If the state change was caused by an underlying object, investigate the status
of the underlying object. An SCF START command may be required to bring the state to
STARTED.
Socket Error
process name
indicates the name of the IPXPROTO process for which this event is generated.
local ipxaddr
indicates the local IPX address to which the local socket is bound.
remote ipxaddr
indicates the remote IPX address to which the remote socket is bound.
opener process name
indicates the process name of the opener of the local socket.
Cause. The IPXPROTO process encountered an internal error on a socket.
Effect. The socket connection is lost. The IPXPROTO process will reply to applications
with the socket error EIO (4005) and release buffers associated with the socket.
Recovery. Applications should close the socket and reopen. If applications cannot
automatically recover from this error, stop and restart the applications.
Recovery. Refer to the TCP/IP and IPX/SPX Programming Manual for a list of socket
errors that describe the error conditions for the socket routines and explain how a
program can recover from these errors.
process name Socket error
Local: local ipxaddr
Remote: remote ipxaddr
Opener: opener process name