IPX/SPX Configuration and Management Manual

Managing NonStop™ IPX/SPX With the Subsystem
Control Facility (SCF)
IPX/SPX Configuration and Management Manual—425731-001
3-10
SCF Command Descriptions
Some commands can affect certain objects but not others. Table 3-3 lists each
NonStop™ IPX/SPX SCF command and the page number where it is described,
indicates whether the command is sensitive or nonsensitive, and shows the object types
each command can affect. (For an explanation of sensitive commands, see Sensitive and
Nonsensitive SCF Commands on page 3-8.)
STATS Displays the accumulated statistics for an object and, optionally, resets
them
STATUS Displays the status of an object
STOP Terminates the operation of an object in an orderly manner
TRACE Captures trace information (activity) of one or more selected objects
VERSION Displays the version level of SCF, SCP, NonStop™ IPX/SPX, or the
NonStop™ Kernel operating system
Table 3-3. NonStop™ IPX/SPX SCF Commands and Object Types (page 1 of 2)
Object Types
NonStop™ IPX/SPX
SCF Command
Sensitive
Command PROCESS
SERVER
(SAP) SUBSYS
ABORT Command on
page 3-11
Yes X X*
ADD Command on
page 3-13
Yes X
ALTER Command on
page 3-16
Yes X
DELETE Command on
page 3-18
Yes X X*
INFO Command on
page 3-20
No X X
LISTOPENS Command
on page 3-26
No X X
NAMES Command on
page 3-29
No X X
START Command on
page 3-31
Yes X X*
STATS Command
on
page 3-33
Yes** X
STATUS Command
on
page 3-38
No X X X
* Indicates that the SUB modifier must be used.
** STATS is sensitive when used with the RESET option.
Table 3-2. SCF Command Overview (page 2 of 2)
Command Description