IPX/SPX Configuration and Management Manual

Managing NonStop™ IPX/SPX With the Subsystem
Control Facility (SCF)
IPX/SPX Configuration and Management Manual—425731-001
3-21
INFO Command
INFO PROCESS Display Format
The format of the display for the INFO PROCESS command without the DETAIL
option is:
Process Name
displays the name of the IPXPROTO process for which the statistics are displayed.
Primary CPU
displays the number of the processor in which the primary IPXPROTO process is
running. It is the primary processor for the ServerNet Addressable Controller
(SAC).
Backup CPU
displays the number of the processor in which the backup IPXPROTO process is
running.
I/O Port Name
displays the IOPORTNAME, which takes the form LIF-name.filter-
protocol.
LIF-name displays the name of the logical interface (LIF). An Ethernet or
token-ring LIF name usually takes the form L0xx.
filter-protocol displays the filter protocol that corresponds to the frame
type of the NetWare LAN.
For more information, see Specifying Processes, LIF Names, and Filter Protocols in
SCF Commands on page 3-8.
I/O Port Type
displays the protocol used. This value is retrieved automatically (there is no
equivalent SCF attribute).
-> INFO PROCESS $ZNV2
IPXSPX Info PROCESS
Process Name Primary CPU Backup CPU *I/O Port Name I/O Port Type
$ZNV2 2 3 L018 IPXETH ETHERNET