IPX/SPX Configuration and Management Manual

Managing NonStop™ IPX/SPX With the Subsystem
Control Facility (SCF)
IPX/SPX Configuration and Management Manual—425731-001
3-23
INFO Command
IPX Max Sockets
is the maximum number of IPX sockets allowed open simultaneously. Use the
STATS PROCESS command to check the current number of IPX opens. (Check the
Open Sockets Count field in the IPX Layer display.) IPX Max Sockets is the
value specified in the ADD or ALTER command parameter IPXMAXSOCKETS.
SPX Max Binds
displays the maximum number of concurrent explicit binds to this IPXPROTO
process. The ADD or ALTER command parameter SPXMAXBINDS specifies the
SPX Max Binds value.
SPX Max Resend
displays the maximum number of times that SPX resends. SPX Max Resend is the
value specified in the ADD or ALTER command parameter SPXMAXRESEND.
Backup CPU
displays the number of the processor in which the backup IPXPROTO process is
running.
I/O Port Type
displays the protocol used. This value is retrieved automatically (there is no
equivalent SCF attribute).
QIO Limit
SPX Max Conn
displays the maximum number of simultaneously active SPX connections. To
compare the maximum number of connections with the current number of
connections, use the STATS PROCESS command to check the current number of
SPX opens. (To do this, check the Open Sockets Count field in the SPX Layer of the
STATS PROCESS display.) SPX Max Conn displays the value specified in the
ADD or ALTER command parameter SPXMAXCONN.
SPX Keep Alive Timer
displays an integer between 1 and 60 that represents the number of minutes before
an SPX connection is pinged to verify the existence of a remote SPX endpoint. (A
ping tests the reachability of another machine on the network.) SPX Keep Alive
Timer displays the value specified in the ADD or ALTER command parameter
SPXKEEPALIVETIMER.
Note. QIO Limit, an attribute of QIO accounting, should be ignored. QIO accounting is not
supported for G-series releases of
NonStop™ IPX/SPX.