IPX/SPX Configuration and Management Manual

Managing NonStop™ IPX/SPX With the Subsystem
Control Facility (SCF)
IPX/SPX Configuration and Management Manual—425731-001
3-26
LISTOPENS Command
Mem Swapvol
displays the name of the disk used for swapping of extended memory.
Program File Name
displays the fully qualified name of the program object file (that is, the codefile) that
creates this IPXMGR process.
Program File Mod
displays the date and timestamp on which the codefile that created this IPXMGR
process was last modified.
Considerations
•
The object-name template (wildcard notation) is supported for the INFO SUBSYS
command. (See Object-Name Templates and Wildcards on page 3-6.)
•
The summary state of the SUBSYS object does not change when this command is
issued.
LISTOPENS Command
The LISTOPENS command displays information about the file-system opens that apply
to the specified PROCESS or SUBSYS object.
LISTOPENS is a nonsensitive command.
LISTOPENS PROCESS
LISTOPENS PROCESS displays a list of file-system opens for the specified
IPXPROTO process.
Command Syntax
OUT file-spec
directs any SCF output generated for this command to the specified file.
file-spec must be a partially or fully qualified name. If you do not specify this
option, the output goes to the home terminal.
PROCESS process-name
is a valid process name indicating the desired IPXPROTO process.
LISTOPENS PROCESS Display Format
The format of the display for the LISTOPENS PROCESS command is:
LISTOPENS [ / OUT file-spec / ] PROCESS process-name