IPX/SPX Configuration and Management Manual

Managing NonStop™ IPX/SPX With the Subsystem
Control Facility (SCF)
IPX/SPX Configuration and Management Manual—425731-001
3-27
LISTOPENS Command
Openers
displays the fully qualified process name of the opener. In this case, $ZNV0 is
opened by the IPXMGR process, $ZMGR.
Primary CPU
displays the number of the processor in which the primary opener process is
running.
Primary PIN
displays the process identification number (PIN) of the primary opener process.
Backup CPU
displays the processor number where the backup opener process resides. A value of
N/A in this field indicates that the backup process is not an opener of this object.
Backup PIN
displays the PIN of the backup opener process. A value of N/A in this field indicates
that the backup process is not an opener of this object.
LISTOPENS SUBSYS
LISTOPENS SUBSYS displays information about the openers of the NonStop™
IPX/SPX subsystem.
Command Syntax
OUT file-spec
directs any SCF output generated for this command to the specified file.
file-spec must be a partially or fully qualified name. If you do not specify this
option, the output goes to the home terminal.
SUBSYS subsystem-name
is the name of the IPXMGR process. This is always $ZMGR.
-> LISTOPENS PROCESS $ZNV0
IPXSPX Listopens PROCESS
Openers Primary CPU Primary PIN Backup CPU Backup PIN
\MFG.$ZMGR 2 46 N/A N/A
LISTOPENS [ / OUT file-spec / ] SUBSYS subsystem-name
[ , SUB { ONLY | ALL | NONE | obj-type } ]