IPX/SPX Configuration and Management Manual

Managing NonStop™ IPX/SPX With the Subsystem
Control Facility (SCF)
IPX/SPX Configuration and Management Manual—425731-001
3-28
LISTOPENS Command
SUB obj-type
selects the subordinate objects the command affects. obj-type can be a
subordinate object type or one of the keywords ONLY, ALL, or NONE.
•
A subordinate object type causes the command to affect only objects of that
type.
•
ONLY causes the command to affect the subordinate objects.
•
ALL causes the command to affect the named object and subordinate objects.
•
NONE specifies that the named object is displayed but none of the subordinate
objects is displayed.
If you omit obj-type, ALL is assumed.
LISTOPENS SUBSYS Display Format
The format of the display for the LISTOPENS SUBSYS command is:
Openers
displays the fully qualified process name of the opener. In this case, $ZNV0 is
opened by the IPXMGR process, $ZMGR.
Primary CPU
displays the number of the processor in which the primary opener process is
running.
Primary PIN
displays the process identification number (PIN) of the primary opener process.
Backup CPU
displays the processor number where the backup opener process resides. A value of
N/A in this field indicates that the backup process is not an opener of this object.
Backup PIN
displays the PIN of the backup opener process. A value of N/A in this field indicates
that the backup process is not an opener of this object.
-> LISTOPENS SUBSYS $ZMGR
IPXSPX Listopens SUBSYS \HIMA.$ZMGR
Openers Primary CPU Primary PIN Backup CPU Backup PIN
\HIMA.$ZNET 0 48 N/A N/A