IPX/SPX Configuration and Management Manual

Managing NonStop™ IPX/SPX With the Subsystem
Control Facility (SCF)
IPX/SPX Configuration and Management Manual—425731-001
3-29
NAMES Command
Considerations
•
The object-name template (wildcard notation) is supported for the LISTOPENS
command. (See Object-Name Templates and Wildcards on page 3-6.)
•
The object must be in the STARTED summary state in order to return opener
information.
•
LISTOPENS is a nonsensitive command. (See Sensitive and Nonsensitive SCF
Commands on page 3-8.)
•
When the LISTOPENS command is completed, the objects remain in their previous
summary state.
NAMES Command
The NAMES command displays a list of object types, and their subordinate objects,
known to the NonStop™ IPX/SPX subsystem.
NAMES is a nonsensitive command.
NAMES PROCESS
NAMES PROCESS displays the object types, and their subordinate objects, known to
the IPXPROTO process.
Command Syntax
OUT file-spec
directs any SCF output generated for this command to the specified file.
file-spec must be a partially or fully qualified name. If you do not specify this
option, the output goes to the home terminal.
PROCESS process-name
is a valid process name indicating the desired IPXPROTO process.
NAMES PROCESS Display Format
The format of the display for the NAMES PROCESS command is:
NAMES [ / OUT file-spec / ] PROCESS process-name