IPX/SPX Configuration and Management Manual

Managing NonStop™ IPX/SPX With the Subsystem
Control Facility (SCF)
IPX/SPX Configuration and Management Manual—425731-001
3-34
STATS Command
Any STATS command returns the time at which the current statistics were sampled and
the time at which the counters were last reset.
STATS is sensitive when used with the RESET option.
STATS PROCESS
STATS PROCESS displays the NonStop™ IPX/SPX subsystem statistics for each of the
protocol layers.
Command Syntax
OUT file-spec
directs any SCF output generated for this command to the specified file.
file-spec must be a partially or fully qualified name. If you do not specify this
option, the output goes to the home terminal.
PROCESS process-name
is a valid process name indicating the IPXPROTO process.
RESET
resets the statistical counters to zero.
STATS PROCESS Display Format
The format of the display for the STATS PROCESS command is:
STATS [ / OUT file-spec / ] PROCESS process-name
[ , RESET ]