IPX/SPX Configuration and Management Manual

Managing NonStop™ IPX/SPX With the Subsystem
Control Facility (SCF)
IPX/SPX Configuration and Management Manual—425731-001
3-35
STATS Command
Reset Time
displays the time at which the counters were last initialized (set to zero).
Sample Time
displays the time at which the statistics were sampled.
Number of Opens
displays the current number of openers of this IPXPROTO process.
QIO Usage
Description of Statistics for the NCP Layer
Inbound Packet Count
displays the total number of inbound packets received by the NCP Layer.
Outbound Packet Count
displays the total number of outbound packets sent from the NCP Layer.
Inbound Packet Errors
displays the total number of times NCP was unable to get a packet from IPX. This
condition occurs when the stream head is out of memory or is not initialized.
-> STATS PROCESS $ZNV0, RESET
IPXSPX Stats PROCESS \IDC14.$ZNV0
Reset Time .............. 24 Apr 2000, 18:39:19.955
Sample Time ............. 24 Apr 2000, 19:01:30.205
Number of Opens ......... 3 QIO Usage (%) ............... N/A
NCP Layer:
Inbound Packet Count ..... 0 Outbound Packet Count ....... 0
Inbound Packet Errors .... 0 Outbound Packet Errors ...... 0
Open Count ............... 0 Message Count ............... 0
Total Errors ............. 0
SPX Layer:
Inbound Packet Count ..... 0 Outbound Packet Count ....... 0
Open Sockets Count ....... 2 Send Failure Count .......... 0
Bad Incoming Packet Cnt .. 0 Suppressed Packet Count ..... 0
Total Errors ............. 0
IPX Layer:
Inbound Packet Count .... 85 Outbound Packet Count ....... 21
Open Sockets Count ...... 2 Open Socket Failure Cnt ..... 0
Find Route Failure Count 0 Dropped Packet Count ........ 0
Total Errors ............ 0
Note. Ignore this field. QIO usage is a function of QIO accounting. QIO accounting is not
supported for G-series releases of
NonStop™ IPX/SPX.