IPX/SPX Configuration and Management Manual

Managing NonStop™ IPX/SPX With the Subsystem
Control Facility (SCF)
IPX/SPX Configuration and Management Manual—425731-001
3-39
STATUS Command
OUT file-spec
directs any SCF output generated for this command to the specified file.
file-spec must be a partially or fully qualified name. If you do not specify this
option, the output goes to the home terminal.
PROCESS process-name
is a valid process name indicating the desired IPXPROTO process.
DETAIL
specifies that the display is to include additional detailed information about the
object.
STATUS PROCESS Display Format
The format of the display for the STATUS PROCESS command without the DETAIL
option is:
Process Name
displays the name of the process about which you want status information.
State
displays the summary state of the specified process. Possible values are
Diagnostic State
indicates why a process is in the STOPPED summary state. Possible values are
-> STATUS PROCESS $ZNV1
IPXSPX Status PROCESS
Process Name State Diagnostic State Trace
$ZNV1 STARTED NORMAL OFF
ABORTING The process is aborting.
STARTED The process is started. It has communicated with a NetWare system and
retrieved the network address of the nearest NetWare server.
STARTING The process is starting.
STOPPED The process is stopped.
STOPPING The process is stopping.