IPX/SPX Configuration and Management Manual

Managing NonStop™ IPX/SPX With the Subsystem
Control Facility (SCF)
IPX/SPX Configuration and Management Manual—425731-001
3-44
STATUS Command
STATUS SUBSYS
STATUS SUBSYS returns information on the current status of the IPXMGR process.
Use the DETAIL option to display additional information.
Command Syntax
OUT file-spec
directs any SCF output generated for this command to the specified file.
file-spec must be a partially or fully qualified name. If you do not specify this
option, the output goes to the home terminal.
SUBSYS subsystem-name
is a valid subsystem name indicating the desired IPXMGR process (always
$ZMGR).
DETAIL
specifies that the display include additional detailed information about the object.
STATUS SUBSYS Display Format
The format of the display for the STATUS SUBSYS command with or without the
DETAIL option is:
State
displays the summary state of the specified process. Possible summary states are:
STATUS [ / OUT file-spec / ] SUBSYS subsystem-name
[ , DETAIL ]
-> STATUS SUBSYS $ZMGR
IPXSPX Status SUBSYS
State Backup State Takeover Count Backup Abend Count
STARTED STOPPED 0 0
ABORTING The process is aborting.
STARTED The process is started. It has communicated with a NetWare system and
retrieved the network address of the nearest NetWare server.
STARTING The process is starting.
STOPPED The process is stopped.
STOPPING The process is stopping.