IPX/SPX Programming Manual

HP NonStop IPX/SPX Programming Manual—528022-001
Index-1
Index
A
accept function
description 5-10
use of 3-7
accept_nw function
description 5-12
use of 3-8
accept_nw2 function
description 5-15
use of 3-8
Address
converting format of 5-30
Address family
AF_NV 4-7
sockaddr_nv data structure 4-7
Advertising of services
stopping 5-71/5-72
AF_NV address family 4-7
AWAITIO procedure
see Guardian procedures
AWAITIOX procedure
see Guardian procedures
B
Basic program steps 3-5
Binary format
converting from hexadecimal 5-29
converting to hexadecimal 5-30
bind function
description 5-17
use of 3-7
bind_nw function 5-17
Broadcasting packet 5-51
Buffered data 3-2
C
C 5-8
C and TAL mixed programming 5-7
C functions
see Socket routines
see Support routines
Calls
see Socket function calls
see Support routines
Case-sensitive routines 5-4
Changes required when porting 3-1
Checking for connections
on nowait socket 5-12
Checkpointing
socket_backup 5-57
Client
basic program steps 3-5
defined 1-4
CLOSE procedure
see Guardian procedures
Closing sockets 3-6
Commands for I/O control 5-65
Commonly used IP protocol numbers A-1
connect function
description 5-20
use of 3-6
Connected socket
sending data nowait 5-42
Connections
accepting 5-10
accepting nowait 5-12, 5-15
checking for nowait 5-12
setting maximum pending TCP 5-31
connect_nw function 5-20
Contrast with IP socket 2-1
Control operations, socket 5-57/5-63
CRE
requirements for pTAL 5-7
requirements for TAL 5-7