IPX/SPX Programming Manual

Library Routines
HP NonStop IPX/SPX Programming Manual—528022-001
5-22
connect, connect_nw
remote.snv_addr s_net[2] = 0x01;
remote.snv_addr s_net[3] = 0x01;
remote.snv_addr s_host[0] = 0x07;
remote.snv_addr s_host[1] = 0x00;
remote.snv_addr s_host[2] = 0x7E;
remote.snv_addr s_host[3] = 0x00;
remote.snv_addr s_host[4] = 0x1E;
remote.snv_addr s_host[5] = 0x17;
remote.snv_addr s_port = 0xaaaa;
if (connect (fd,(struct sockaddr)&remote,sizeof(remote)) <0) {
perror (“Client failed to connect to remote host.”)
exit (0);
}
printf (“CLIENT:Connected ...\n”;