iTP Secure WebServer Operator Messages Manual

WEBSERV Messages
iTP Secure WebServer Operator Messages Manual—429507-002
1-5
Events 1 through 999: WebServer (httpd process)
Messages (Identifier: httpd)
201
directive-name
is the configuration directive being executed.
server-name
is the name of the server.
port-num
is the port number.
err-msg
is the OSS-supplied error message text that further defines the cause of the error.
Cause. The iTP Secure WebServer could not bind to the specified server port. Refer
to the error reported in the message for more details about the cause.
Effect. The specified server port is not active.
Recovery. Check the directive in the configuration file (httpd.config). Verify that the
server name and port are spelled correctly, and that the specified port is not already
active. Restart the iTP Secure WebServer.
For information about configuration directives, see the iTP Secure WebServer System
Administrator’s Guide .
204
group-name
is the unknown user name.
Cause. The iTP Secure WebServer environment stopped because the WebServer
cannot recognize a user name specified in the User directive section of the
configuration file (httpd.config).
Effect. The iTP Secure WebServer environment stops.
Recovery. Check the User directive section of the configuration file (httpd.config) to
verify that the user name is spelled correctly. Verify that the user name exists by using
the SAFECOM INFO GROUP * command. Restart the iTP Secure WebServer.
(#201) directive-name directive: could not bind server to
server-name port port-num ( err-msg )
(#204) Group directive: can’t change to group group-name
(unknown group name)