iTP Secure WebServer Operator Messages Manual

WEBSERV Messages

iTP Secure WebServer Operator Messages Manual—429507-002

1-26

Events 1 through 999: WebServer (httpd process)

Messages (Identifier: httpd)

Cause. The system administrator configured the iTP Secure WebServer

TANDEM_RECEIVE_DEPTH environment variable with a value that is less than 1.

Effect. The iTP Secure WebServer defaults to a receive depth of 1.

Recovery. If the iTP Secure WebServer requires a larger receive depth value, the

system administrator must stop the iTP Secure WebServer, modify the configuration

file (httpd.config) to include the TANDEM_RECEIVE_DEPTH environment variable

with the desired receive depth value, and restart the iTP Secure WebServer. See the

iTP Secure WebServer System Administrator’s Guide

for information about configuring

the TANDEM_RECEIVE_DEPTH environment variable.

575

number

is the invalid value specified for TANDEM_RECEIVE_DEPTH.

Cause. The system administrator configured the iTP Secure WebServer

TANDEM_RECEIVE_DEPTH environment variable with a value that is greater than

255.

Effect. The iTP Secure WebServer defaults to a receive depth of 255.

Recovery. If the iTP Secure WebServer requires a different receive depth value, the

system administrator must stop the iTP Secure WebServer, modify the configuration

file (httpd.config) to include the TANDEM_RECEIVE_DEPTH environment variable

with the desired receive depth value, and restart the iTP Secure WebServer. See the

iTP Secure WebServer System Administrator’s Guide

for information about configuring

the TANDEM_RECEIVE_DEPTH environment variable.

576

ferror-code

is a code for the file-system error that occurred. See the

Guardian Procedure

Errors and Messages Manual

for explanations of the file-system error codes.

Cause. The iTP Secure WebServer encountered an error executing REPLYX for a

PATHMON reply. Refer to the error reported in the message for more details about the

cause.

Effect. The httpd process exits.

Recovery. Stop the current the iTP Secure WebServer environment and restart the

iTP Secure WebServer.

(#575) ENV TANDEM_RECEIVE_DEPTH=

number

not valid, defaulting

to 255

(#576) REPLYX failed

ferror-code