iTP Secure WebServer Operator Messages Manual

WEBSERV Messages
iTP Secure WebServer Operator Messages Manual—429507-002
1-46
Events 2000 through 2999: Distributor Process
Messages (Identifier: dist)
2032
socket-error
is an error code returned by the TCP/IP socket function. See the TCP/IP and
IPX/SPX Programming Manual for explanations of socket errors.
Cause. The sock_close_reuse_nw operation failed with an error. Refer to the error
reported in the message for more details about the cause.
Effect. The Distributor process exits.
Recovery. Contact your service provider, and provide all relevant information as
described in the beginning of Events 2000 through 2999: Distributor Process
Messages (Identifier: dist) on page 1-33.
2033
ferror-code
is a code for the file-system error that occurred. See the Guardian Procedure
Errors and Messages Manual for explanations of the file-system error codes.
Cause. The sock_close_reuse_nw operation failed to complete correctly. Refer to the
error reported in the message for more details about the cause.
Effect. The Distributor process exits.
Recovery. Contact your service provider, and provide all relevant information as
described in the beginning of Events 2000 through 2999: Distributor Process
Messages (Identifier: dist) on page 1-33.
2034
Cause. This message indicates a Distributor process configuration error.
Effect. The Distributor process exits.
Recovery. Change the number of ports specified in the Accept or
AcceptSecureTransport directive so that they specify a value less than 200.
For information about the Accept and AcceptSecureTransport directives, see the iTP
Secure WebServer System Administrator’s Guide .
(#2032) sock_close_reuse_nw error:errno= socket-error
(#2033) socket: AWAITIOX failed after sock_close_reuse_nw():
ferror-code
(#2034) The number of ports configured exceeds 200.