iTP Secure WebServer Operator Messages Manual

WEBSERV Messages
iTP Secure WebServer Operator Messages Manual—429507-002
1-47
Events 2000 through 2999: Distributor Process
Messages (Identifier: dist)
2055
Cause. During its startup, the Distributor process detected that the httpd LINKDEPTH
configuration parameter is not set to one.
Effect. The Distributor process will not start.
Recovery. Edit the configuration file (httpd.config) and change the httpd server's
LINKDEPTH parameter to 1. Start the iTP Secure WebServer. For specific information
about the LINKDEPTH parameter, see the iTP Secure WebServer System
Administrator’s Guide .
2056
ts/mp-error
is the error received from the NonStop TS/MP environment.
file-system-error
is the file system error received.
Cause. The Distributor process cannot establish a context-sensitive dialog with an
httpd process.
Effect. Any existing context-sensitive dialogs continue to be used. The Distributor
process attempts to reestablish the dialog five times. Scaling up the environment is
limited as long as this error condition exists.
Recovery. Investigate the NonStop TS/MP error condition to determine why the
context-sensitive dialog cannot be established. Take corrective actions as necessary.
2057
Cause. The Distributor process has detected that the statically configured httpd
processes (those indicated by the NUMSTATIC parameter) have reached 80% of their
total capacity.
Effect. None. This is a warning message indicating that you may need to configure
additional capacity.
(#2055) httpd LINKDEPTH not equal 1
(#2056) Unable to contact httpd process, pathsend error
ts/mp-error , file system error file-system-error
(#2057) 80% of maximum configured static httpd process
threads are in use