Manualshelf

iTP Secure WebServer Operator Messages Manual

ManualsBrandsHP ManualsServerHP NonStop G-Series
61626364656667686970
WEBSERV Messages
iTP Secure WebServer Operator Messages Manual—429507-002
1-48
Events 2000 through 2999: Distributor Process
Messages (Identifier: dist)
Recovery. This event does not require any explicit recovery actions; however, if you
want to configure more capacity, you can increase the httpd server configuration
parameters TANDEM_RECEIVE_DEPTH or NUMSTATIC until this event is not
generated under normal server usage. Changing these parameters requires that you
restart the iTP Secure WebServer. For specific information about the httpd server
configuration TANDEM_RECEIVE_DEPTH and NUMSTATIC parameters, see the
iTP
Secure WebServer System Administrator’s Guide.
2058
Cause. The Distributor process has detected that the statically configured httpd
processes (those indicated by the NUMSTATIC parameter) have reached 90% of their
total capacity.
Effect. None. This is a warning message indicating that you may need to configure
additional capacity.
Recovery. This event does not require any explicit recovery actions; however, if you
want to configure more capacity, you can increase the httpd server configuration
parameters TANDEM_RECEIVE_DEPTH or NUMSTATIC until this event is not
generated under normal server usage. Changing these parameters requires that you
restart the iTP Secure WebServer. For specific information about the httpd server
configuration TANDEM_RECEIVE_DEPTH and NUMSTATIC parameters, see the
iTP
Secure WebServer System Administrator’s Guide
.
2059
Cause. The Distributor process has detected that the statically configured httpd
processes (those indicated by the NUMSTATIC parameter) have reached 100% of
their total capacity.
Effect. None. This is a warning message indicating that you may need to configure
additional capacity.
Recovery. This event does not require any explicit recovery actions; however, if you
want to configure more capacity, you can increase the httpd server configuration
parameter TANDEM_RECEIVE_DEPTH or NUMSTATIC until this event is not
generated under normal server usage. Changing these parameters requires that you
restart the iTP Secure WebServer. For specific information about the httpd server
configuration TANDEM_RECEIVE_DEPTH and NUMSTATIC parameters, see the
iTP
Secure WebServer System Administrator’s Guide
.
(#2058) 90% of maximum configured static httpd process
threads are in use
(#2059) 100% of maximum configured static httpd process
threads are in use