iTP Secure WebServer Operator Messages Manual

WEBSERV Messages
iTP Secure WebServer Operator Messages Manual—429507-002
1-64
Events 6000 through 6999: WebSafe2 Messages
(Identifier: wsf)
6008
error-num
is a code for the WID error returned.
error-text
is the text of the WID error returned.
Cause. The WebSafe2 Interface Driver (WID) server returned a WID error when the
GET_CERTIFICATE function was called.
Effect. The request aborts.
Recovery. Examine the WID trace files (which log communications between the
WebSafe2 unit and the WID) and the WID error log to help determine the cause.
Contact your service provider, and provide these files and the additional information
described in the beginning of Events 6000 through 6999: WebSafe2 Messages
(Identifier: wsf) on page 1-61.
6009
pathmon-name
is the name of the PATHMON process for the environment where the WID
processes are running.
server-class
is the name of the WID server class.
Cause. The iTP Secure WebServer was unable to ping the WebSafe2 Interface Driver
(WID) server during startup.
Effect. The iTP Secure WebServer fails to start.
Recovery. Ensure that the WID server class is started when the iTP Secure
WebServer is started.
(#6008) Command GET_CERTIFICATE failed. WID error: error-num
error-text
(#6009) Can not communicate with WID server pathmon-
name:server-class . Make sure it is started properly