iTP Secure WebServer Operator Messages Manual

WEBSERV Messages
iTP Secure WebServer Operator Messages Manual—429507-002
1-66
Events 6000 through 6999: WebSafe2 Messages
(Identifier: wsf)
Recovery. Contact your service provider, and provide the information described in the
beginning of Events 6000 through 6999: WebSafe2 Messages (Identifier: wsf) on
page 1-61.
6016
Cause. The certificate specified in the AcceptSecureTransport command was not
found in the WID keyfile.
Effect. The iTP Secure WebServer does not start.
Recovery. Make sure the DN specified by the AcceptSecureTransport command
matches the one in the key certificate.
For information about the AcceptSecureTransport directive, see the iTP Secure
WebServer System Administrator’s Guide .
6019
error-num
is a code for the WID error returned.
Cause. The secret key cannot be decrypted using the KEK provided.
Effect. The Secure Sockets Layer (SSL) handshake fails.
Recovery. Informational message only; no corrective action is required.
6020
error-num
is a code for the WID error returned.
error-text
is the text of the WID error returned.
Cause. The WebSafe2 Interface Driver (WID) using the WebSafe2 unit cannot decrypt
the secret key encrypted with the server’s public key. See the WID trace file for details.
(#6016) The DN to be used by WebSafe is not found. Make sure
that AcceptSecureTransport -cert or SSLName directive specify
the correct DN
(#6019) Decrypt secret key using KEK failed.
Error = error-num
(#6020) Command SSL_DECRYPT_SECRET_KEY to WID failed. WID
error error-num error-text