iTP Secure WebServer System Administrator's Guide (iTPWebSvr 5.1+)

Integrating the WebSafe2 Internet Security
Processor (WISP)
iTP Secure WebServer System Administrator’s Guide—522659-001
5-21
To Switch From Software to WebSafe2 (Hardware)
Encryption
To Switch From Software to WebSafe2 (Hardware)
Encryption
If you initially use SSL encryption in software and then migrate to WISP use, you must
do the following:
•
Generate a new key pair and obtain a new certificate for use with the WISP; the key
pair and certificate used with software SSL encryption cannot be used for WebSafe2
encryption. For information about generating key pairs and obtaining certificates for
WebSafe2 encryption, see Generating the Public/Private Key Pair and Obtaining the
Certificate on page 5-9.
•
Execute install.WS -websafe.
•
Restart the iTP Secure WebServer as described in Section 6, Managing the iTP
Secure WebServer Using Scripts.
Where to Go From Here
To learn more about configuring the iTP Secure WebServer, refer to Section 7,
Configuring the iTP Secure WebServer. To learn more about how to manage the iTP
Secure WebServer, refer to Section 6, Managing the iTP Secure WebServer Using
Scripts.