iTP Secure WebServer System Administrator's Guide (iTPWebSvr 5.1+)

Configuring the iTP Secure WebServer

iTP Secure WebServer System Administrator’s Guide—522659-001

7-55

The WID Configuration File

Example 7-5 illustrates the contents of a sample wid.config file:

Example 7-5. Sample WID Configuration File

# filename: wid.config.sample

# blank lines and lines starting with # are ignored

# address of WebSafe Atalla boxes, maximum of 16

# optional TCP/IP process name after IP address

# just add lines with ip = ip address for more Atalla

# boxes

ip = 172.16.10.11 $ZTC9

ip = 172.16.11.13 $ZTC9

# TCP/IP timeout value to the Atalla boxes in 0.01 seconds

# if not set, the default is 500

timeout = 300

# filename for storing certificate and key information

# this entry is required

keyfile = /usr/tandem/webserver/conf/wid.keyfile

# Atalla websafe box highest SSL version supported

# optional

# SSL3 for Atalla websafe boxes 2611 and above with SSL3 support

# SSL2 for Atalla websafe boxes prior to 2611

version = SSL3

# directory to write temporary wid files

# if not set, the default is /tmp

#logdir = /usr/tandem/webserver/logs

# if tracefile is set, all communication to and from

# Atalla boxes is logged

# optional and should be set only if problem arises

# tracefile = /usr/tandem/webserver/logs/widtrace.log

# if errorfile is set, wid errors are logged to this file

# optional but should be set to log errors

errorfile = /usr/tandem/webserver/logs/widerror.log