iTP Secure WebServer System Administrator's Guide (iTPWebSvr 6.0+)

Integrating the WebSafe2 Internet Security
Processor (WISP)
iTP Secure WebServer System Administrator’s Guide—523346-002
5-18
Using Earlier Version Keys and Certificates
Using Earlier Version Keys and Certificates
Observe the following guidelines if you intend to use keys and certificates generated or
configured with earlier versions of the iTP Secure WebServer or the WISP’s firmware.
If you are using the SSL 2.0 protocol, observe the following guidelines:
iTP Secure
WebServer
Version
WebSafe2 Internet
Security Processor
(WISP) Firmware
Version SSL Support Recommended Action
Earlier than 3.2 Any SSL 2.0 only Upgrade as needed for
SSL 3.0 support for
enhanced security
3.2 2611 or later SSL 2.0 and SSL
3.0
New certificate required
3.3 or later Earlier than 2611 SSL 2.0 only Upgrade as needed for
SSL 3.0 support for
enhanced security
2611 or later SSL 2.0 and SSL
3.0
New certificate required
Keys Were Generated With:
keyadmin
Version
WebSafe2 Internet
Security Processor
(WISP) Firmware
Version
Certificate
Configured With
WebSafe2 Internet
Security Processor
(WISP) Firmware
Version
Can You Use the
Certificate?
Earlier than iTP
Secure
WebServer 3.3
2.4 or earlier 2.4 or earlier Yes
Earlier than iTP
Secure
WebServer 3.3
2.4 or earlier 250 or later Yes, after key conversion
is done
1
Earlier than iTP
Secure
WebServer 3.3
250 or later 250 or later Yes
Any version 250 or later 2.4 or earlier No; the APKB format is
incompatible
2
iTP Secure
WebServer 3.3
250 or later 2611 or later Yes