iTP Secure WebServer System Administrator's Guide (iTPWebSvr 6.0+)

Configuration Directives
iTP Secure WebServer System Administrator’s Guide—523346-002
A-7
Description
For integrity checking, you can use either the MD5 or SHA cipher.
-name server-name
Use the -name argument to specify the name used to refer to the server. The iTP
Secure WebServer uses this name whenever it needs to generate a URL that
refers to itself, such as with anchor specifications in HTML files.
The name you specify must be a valid name or alias registered with the Domain
Name Server (DNS). For more information about setting up an alias, consult your
system documentation or network administrator. If no -name option is specified,
the iTP Secure WebServer uses the server address (server-addr) if -address is
specified. Otherwise, the iTP Secure WebServer uses the host name of the
machine on which it is running.
-port port-num
Use the -port argument to configure the server to check for connections on a
specified port (port-num).
The standard port number for SSL and PCT connections is 443. If you choose
another port, check the $SYSTEM.ZTCPIP.SERVICES file to ensure that this port
is not already allocated to another service.
If you choose any port number less than 1024, you need to be root (superuser) to
start the iTP Secure WebServer. The default port number 443 is used if no -port
argument is specified.
-websafe pathmon:server-class
Use the -websafe argument to enable a virtual host to use the WebSafe2 unit,
even if other virtual hosts do not use it, or to enable different virtual hosts to use
different WID server classes. Use pathmon:server-class to specify the name
of the PATHMON process and the name of the WID server class that controls the
DES-CBC-MD5 No Yes No Yes
RC2-CBC-MD5 No Yes No Yes
RC2-CBC-SHA1 No No No Yes
EXP-RC4-MD5 Yes Yes Yes Yes
EXP-RC4-SHA1 Yes No No Yes
EXP-RC2-CBC-MD5 Yes Yes Yes Yes
EXP-RC2-CBC-SHA1 Yes No No Yes
* Support provided if you are using a WebSafe2 unit with firmware 2611 or above.
Table A-2. Cipher Pairs Supported (by Protocol) (page2of2)
Cipher
Allowed
Global SSL 2.0 SSL 3.0 PCT