iTP Secure WebServer System Administrator's Guide (iTPWebSvr 6.0+)

Installing the iTP Secure WebServer
iTP Secure WebServer System Administrator’s Guide—523346-002
2-11
Setup for Parallel Library TCP/IP Support
these directories or subdirectories, you will have to reinstall the entire product
starting with unpaxing the product PAX file.
3. You may now install Setup for Parallel Library TCP/IP Support, Install a WISP or
Install the Resource Locator.
Setup for Parallel Library TCP/IP Support
In addition to scanning for conventional TCP/IP processes, the setup script will check
for the presence of TCPSAM processes on the target system. The script will query
your intentions. Here are some examples of the interaction:
If you wish to use Parallel Library TCPIP as your underlying transport
services, you need only one TCPSAM (TCP Socket Access Method) process.
Therefore, the following lookup process will only list the first one it
encounters.
If you wish to use a TCPSAM process other than the one in the list, please
follow the manual configuration procedures.
Do you wish to use ONLY the Parallel Library TCPIP as your transport
services?
Type y/n (Default: n) #: y
Looking up running TCPSAM process on your system...please wait
You can use the conventional TCP/IP support, the Parallel Library support, or both. If,
for some unlikely reason you had to use both versions of support (presumably for
some non iTP Secure WebServer reason) you would not get the Auto-Accept feature
from the iTP Secure WebServer and so would receive little in the way of performance
improvement.
The example script below continues as if you had replied Yes to the Parallel Library
TCP/IP query by presenting you with a menu of choices. Notice that the script found a
TCPSAM process ($ZSAM1) running, so is allowing you to continue with the
configuration.
1) Skip configuring iTP WebServer (i.e., configuration exists)
2) Auto-configure iTP WebServer
Defaults:
TCP/IP process: /G/ZSAM1
TCP/IP Port: 80
TCP/IP Secure Port: 443
Test Certificate:
CN=Secure Transport Bootstrap Certificate,
OU=Testing Only - Do Not Trust for Secure Transactions,
OU=No Assurance - Self-Signed, OU=Generated <dateString>,
O=<organization>
Pathmon name: /G/zweb
Guardian Pathmon subvolume name: /G/system/zweb.
3) Perform manual configuration for iTP WebServer
Choose 1, 2 (Default) or 3 #:
There are other dialogs with the setup script if you choose conventional TCP/IP
support, or support for both types of support.