iTP Secure WebServer System Administrator's Guide (Version 7.0)

Installing the iTP Secure WebServer
iTP Secure WebServer System Administrator’s Guide—523346-012
2-2
Required and Optional Software
Required and Optional Software
These HP NonStop product versions are required for using the iTP Secure WebServer:
•
NonStop operating system version D42 or later RVU, or G03 or later RVU, or
H06.03 or later RVU. For information about installing the NonStop operating
system, see the INSTALL User’s Guide or the DSM/SCM User’s Guide.
•
Open System Services (OSS) file system, D40 or later RVU. For information on
creating an OSS environment, see the Open System Services Installation Guide.
•
TCP/IP, including the Sockets library and SCF, D40 or later RVU, and G06 or later
RVU. The IP addresses of both the iTP Secure WebServer and the NonStop
system must be registered on the Domain Name Server (DNS) of your LAN.
For information about installing and configuring TCP/IP and DNS, see the TCP/IP
Configuration and Management Manual.
For information about installing and configuring Parallel Library TCP/IP, see the
TCP/IP (Parallel Library) Configuration and Management Manual.
For information about installing and configuring TCP/IPv6, see the TCP/IPv6
Configuration and Management Manual.
For information about installing and configuring IP CIP, see the Cluster I/O
Protocols (CIP) Configuration and Management Manual.
•
NonStop TS/MP subsystem, with PATHMON and Pathsend features, version D40 or
later. For information on installing and configuring this subsystem, see the TS/MP
System Management Manual.
•
NonStop SQL/MP D42 or later, including TSQLEXE, TSQLCAT, TSQLUTI,
TSQLFIL, and TSQLMSG. This product is required only if you will be using the
Resource Locator Service (RLS).
These software products are optional for using the iTP Secure WebServer:
•
NonStop Server for Java (NSJ) 2.0, if you plan to use Java servlets in the iTP
Secure WebServer environment. For information about the NonStop Server for
Java 2.0, see the NonStop Server for Java Programmer’s Reference.
•
NonStop Servlets for JavaServer Pages (NSJSP) V10 or later, if you plan to use
Java servlets in the iTP Secure WebServer environment. For information about
installing NSJSP, see NonStop Servlets for JavaServer Pages (NSJSP) System
Administrator’s Guide.
•
NonStop Tuxedo, if you will be using Active Transaction Pages (ATP) and are not
using IEEE floating-point support. For more information about ATP, see the iTP
Active Transaction Pages (iTP ATP) Programmer’s Guide.
•
The WebSafe2 Interface Driver (WID), which provides an interface between the
WISP and the iTP Secure WebServer. The WID is a NonStop TS/MP server class
that you can run in the iTP Secure WebServer PATHMON environment or in any