iTP Secure WebServer System Administrator's Guide (Version 7.0)

Contents
iTP Secure WebServer System Administrator’s Guide—523346-012
ii
1. Introduction to the iTP Secure
WebServer (continued)
1. Introduction to the iTP Secure WebServer (continued)
Secure Sockets Layer (SSL) and Private Communications Technology (PCT)
Encryption 1-11
WebSafe2 Encryption 1-11
2. Installing the iTP Secure WebServer
iTP Secure WebServer System Requirements 2-1
Supported NonStop Systems 2-1
Required and Optional Software 2-2
Required Hardware 2-3
Preparing Your System for the iTP Secure WebServer 2-3
Event Management Service (EMS) Template Installation 2-6
Installing and Configuring the iTP Secure WebServer 2-7
Before You Begin the Installation 2-8
Begin the Installation 2-8
Use DSM/SCM (for RVU G06.18 onwards with OSS Support) 2-8
Use DSM/SCM 2-9
Run the IPSetup Program 2-9
Copy the iTP Secure WebServer Software From the Distribution Medium 2-10
Run the Setup Script 2-11
Setup for Parallel Library TCP/IP Support 2-14
Setup for TCP/IPv6 support 2-15
Setup for IP CIP Support 2-16
Install a WISP 2-17
Install the Resource Locator 2-17
Installation Considerations 2-18
Verifying the Configuration
2-18
Upgrading iTP Secure WebServer online
2-19
The Ninety-Day Test Certificate 2-21
Test-Starting the Administration Server and the iTP Secure WebServer 2-21
If You Plan to Use SSL or PCT Encryption 2-22
If You Plan to Use WebSafe2 Encryption 2-22
If You Are Using the Nonsecure Version 2-22
3. Planning the iTP Secure WebServer PATHMON Environment
Conventional TCP/IP: The Distributor Process 3-1
Parallel Library TCP/IP, TCP/IPv6, and IP CIP: The Auto Accept Feature 3-2
Migration Considerations For Parallel Library TCP/IP, TCP/IPv6, and IP CIP
Support 3-2
Configuring the PATHMON Environment 3-4