iTP Secure WebServer System Administrator's Guide (Version 7.0)

Installing the iTP Secure WebServer
iTP Secure WebServer System Administrator’s Guide—523346-012
2-13
Run the Setup Script
/G/YWEB) during auto configuration. However, during manual configuration, you
will be prompted to supply two PATHMON names and at least one of the Parallel
TCP/IP, TCP/IPv6, or IP CLIM transport service name. A sample interaction is as
follows:
Configuring iTP WebServer...
Choose from menu below:
1) Skip configuring iTP WebServer (configuration exists)
2) Auto-configure iTP WebServer
Defaults:
TCP/IP process: /G/ZSAM2
TCP/IP Port: 80
First Pathmon: /G/zweb
Second Pathmon: /G/yweb
Guardian Pathmon subvolume name: /G/system/zweb.
3) Perform manual configuration for iTP WebServer
Choose 1, 2 (Default) or 3 #: 3
Enter a space separated list of TCP/IP processes which the
iTP Admin Server or
iTP WebServer will use. The process name must be entered in
OSS format.
Default: /G/ZSAM2
#:/G/ZSAM2
Enter the First Pathmon to use for your iTP WebServer
(Default /G/zweb)
#: /G/TWEB
Enter the Second Pathmon to use for your iTP WebServer
(Default /G/yweb)
#: /G/UWEB
Note.
•
The target installation path cannot be the same as the source path.
•
If the iTP Secure WebServer is installed at an OSS directory other than the default
/usr/tandem/webserver, the changes must be made to the WID configuration if it
is installed. WID is compatible only with systems running on G-series RVUs.