iTP Secure WebServer System Administrator's Guide (Version 7.0)

ManualsBrandsHP ManualsServerHP NonStop G-Series

Installing the iTP Secure WebServer

iTP Secure WebServer System Administrator’s Guide—523346-012

2-15

Setup for TCP/IPv6 support

TCP/IP Secure Port: 443

Test Certificate:

CN=Secure Transport Bootstrap Certificate,

OU=Testing Only - Do Not Trust for Secure Transactions,

OU=No Assurance - Self-Signed, OU=Generated <dateString>,

O=<organization>

Pathmon name: /G/zweb

Guardian Pathmon subvolume name: /G/system/zweb.

3) Perform manual configuration for iTP WebServer

Choose 1, 2 (Default) or 3 #:

There are other dialogs with the setup script if you choose conventional TCP/IP

support, or support for both types of support.

Setup for TCP/IPv6 support

In addition to scanning for conventional TCP/IP processes, the setup script will check

for the presence of TCPSAM processes on the target system. The script will query

your intentions. Here are some examples of the interaction:

If you want to use TCP/IPv6 as your underlying transport services, you need

only one TCP6SAM (TCP Socket Access Method) process. Therefore, the

following lookup process will only list the first one it encounters.

If you want to use a TCP6SAM process other than the one in the list, follow

the manual configuration procedures.

Do you want to use ONLY TCP/IPv6 as your transport services?

Type y/n (Default: n) #:

You can use the conventional TCP/IP support, the TCP/IPv6 support, or both. If you

had to use both versions of support (presumably for some non iTP Secure WebServer

reason) you would not get the Auto-Accept feature from the iTP Secure WebServer

and so would receive little in the way of performance improvement.

The sample script continues as if you had replied Yes to the TCP/IPv6 query by

presenting you with a menu of choices. Notice that the script found a TCPSAM process

($ZSAM1) running, so is allowing you to continue with the configuration.

1) Skip configuring iTP WebServer (that is, configuration exists)

2) Auto-configure iTP WebServer

Defaults:

TCP/IP process: /G/ZSAM1

TCP/IP Port: 80