iTP Secure WebServer System Administrator's Guide (Version 7.0)

Installing the iTP Secure WebServer
iTP Secure WebServer System Administrator’s Guide—523346-012
2-17
Install a WISP
system and prompts for your response. Following are some examples of the
interaction:
If you wish to use IP CLIM as your underlying transport services, you need
only one CIPSAM (CIP Socket Access Method) process. Therefore, the following
lookup process will only list the first one it encounters.
If you wish to use a CIPSAM process other than the first one in the list,
please follow the manual configuration procedures.
Do you wish to use ONLY IP CLIM as your transport services?
Type y/n (Default: n) #:
You can use the conventional TCP/IP support, the IP CIP support, or both. If you want
to use both versions of support (presumably for some non iTP Secure WebServer
reason) you will not be able to use the Auto-Accept feature from the iTP Secure
WebServer; this results in low performance improvement.
The sample script continues as if you had replied Yes to the IP CIP query by
displaying a menu. In the following example, the script finds a CIPSAM process
($CSAM) running; and hence, allows you to continue with the configuration.
1) Skip configuring iTP WebServer (i.e., configuration exists)
2) Auto-configure iTP WebServer
Defaults:
TCP/IP process: /G/CSAM
TCP/IP Port: 80
Pathmon name: /G/zweb
Guardian Pathmon subvolume name: /G/system/zweb.
3) Perform manual configuration for iTP WebServer
Install a WISP
After you install the iTP Secure WebServer, you can install a WebSafe2 Internet
Security Processor (WISP) device by running install.WS (provided in the
/usr/tandem/webserver/admin/conf directory) with the -websafe option. This
adds the WISP configuration information to the existing iTP Secure WebServer
configuration file, and the script properly configures the WID and iTP Secure
WebServer for WISP operations.
You should back up prior versions of your configuration files before executing
install.WS.
Install the Resource Locator
You can install the optional Resource Locator feature with the iTP Secure WebServer.
The Resource Locator feature has specific dependencies that should be considered
Note. WISP and WID are compatible only with systems running on G-series RVUs.