iTP Secure WebServer System Administrator's Guide (Version 7.0)

Installing the iTP Secure WebServer
iTP Secure WebServer System Administrator’s Guide—523346-012
2-20
Upgrading iTP Secure WebServer online
TACL> LOGON SUPER.WEB
TACL> OSH
OSS: cd /usr/tandem/webserver/<version>
/usr/tandem/webserver/<version>: ./setup /home/iTP
*** Welcome to iTP WebServer Setup ***
iTP WebServer will be installed into directory: /home/iTP
*** WARNING ***
A user ID other than SUPER.SUPER should be used to execute this setup
program.
It is recommended that a super ID (such as SUPER.WEBMASTR) be configured
for the OSS environment and used for this purpose. A super Group ID can
use any TCP/IP port and usually the $SYSTEM disk while a non super Group
userid can only use TCP/IP ports with a value greater than 1024 and are
usually excluded from using the $SYSTEM disk.
Press the Enter key to continue...
Checking current configuration...Please wait!
Detected a previous installation of Non-Secure version with Online-Upgrade
enabled.
Your iTP WebServer supports Online-Upgrade.
Do you wish to upgrade it now?
Type y/n (Default: n) #: y
*** Note ***
If you wish to use Online-Upgrade feature, make sure to select only
Parallel TCP/IP, TCP/IPv6 or IP CLIM as your underlying transport services.
*** Note ***
For Online-Upgrade support, system must be configured with TS/MP 2.3 or
higher.
Also, make sure that both the webserver Pathmon processes are configured
under a common domain in the ACS Control file.
Checking system compatibility for Online-Upgrade... [OK]