Jolt 1.2 Developer's Guide
Table Of Contents
- Jolt for NonStop(TM) TUXEDO Developer's Guide
- Jolt for NonStop(TM) TUXEDO Developer's Guide
- About This Guide
- 1. Introducing Jolt
- 2. Installing Jolt
- 3. Configuring the Jolt System
- 4. Bulk Loading NonStopTM TUXEDO Services
- 5. Using the Jolt Repository Editor
- 6. Using the Jolt Class Library
- 7. Using JoltBeans
- 8. Using Servlet Connectivity for NonStopTM TUXEDO
- 9. Using Jolt 1.2 ASP Connectivity for NonStopTM TUXEDO
- A. NonStopTM TUXEDO Errors
- B. System Messages
- Index
1506
ERROR: Connection to JSL failed.
Description JSL is not running.
Action Check the address given with option -c.
1507
ERROR: Sending message to JSL failed.
Description JSL is not running or the network connection is down.
Action Restart the JRAD/JSL.
1508
INFO: Sending message to JSH failed.
Description Network is down. Connection to the JSH failed.
Action Check the network and restart the JSL.
1509
ERROR: Sending CONNECT reply to JRLY.
Description Unable to reach JRLY. Probably problem in the network.
Action Restart the JRLY and JRAD after check the network addresses.
1510
ERROR: Sending SHUTDOWN reply to JRLY.
Description Unable to reach JRLY. Probably problem in the network.
Action Restart the JRLY and JRAD after check the network addresses.
Jolt Relay (JRLY) Messages
ERROR: Ignoring syntax error in configuration file line %d
Description The line in question doesn't contain an equal sign or (in case of the LISTEN and CONNECT tag) is missing the
colon.
Action Verify the syntax of the configuration file at the specified line.
ERROR: Ignoring unknown tag '%s' in configuration file line %d.
Description The line in question is does not contain one of the valid tags: LOGDIR, ACCESS_LOG, ERROR_LOG,
LISTEN, CONNECT.
Action Verify the syntax of the configuration file at the specified line.
ERROR: MSG_MALLOC: perror().