Jolt 1.2 Readme

ManualsBrandsHP ManualsServerHP NonStop G-Series

READ THIS FILE COMPLETELY BEFORE BEGINNING PRODUCT INSTALLATION

Product Name: Compaq Jolt for NonStop(TM) TUXEDO (R1.2)

Export Control Classification Number (ECCN): 5D992 MO

Product ID:

SR64V3 (for Himalaya system with 1 through 4 CPUs)

SR65V3 (for Himalaya system with 5 through 16 CPUs)

Component Products:

Component NonStop(TM) TUXEDO T-number(s) (V03 version):

T0227 - NSTUXEDO JOLT Export

T0444 - Compaq Jolt for NonStop(TM) TUXEDO Docs

Note: For possible replacement installation steps or other product

documentation changes, see the following World Wide Web site:

http://himalaya.compaq.com/nsswdocs/tuxedo/home.htm

DATE: This ReadMe file was last updated 13 September 2000.

I. Basic Product Installation Instructions

1. Ensure that the requirements for using this product are met

(see Section IV Product Requirements below).

2. Ensure that the prerequisites for the installation utility and any

product-specific installation requirements are met

(see Section V Installation Prerequisites below).

3. Review the file USRGUIDE.PDF (in the subdirectory NSK_SW on this

CD) containing the IPSetup User Guide, which provides instructions

for using IPSetup, a utility provided on the CD that enables

installation of Independent Products. You need version 3.0 or

later of Adobe Acrobat Reader or Exchange to read or print the

IPSetup User Guide and NonStop(TM) TUXEDO Documentation. Obtain

the Reader by downloading it from the following URL:

http://www.adobe.com/prodindex/acrobat/readstep.html

4. Use either of the following methods to move/copy files to the

Installation Subvolumes: (A) IPSetup only, or (B) IPSetup in

conjunction with DSM/SCM.

5. Follow the pre-installation instructions in Section II below, if

any, before continuing to Step 6.

6. If you use DSM/SCM to move the files to the Installation

Subvolumes, ensure that you check the "Use DSM/SCM" box and run

all phases of DSM/SCM before you run the Install.sh script.

If you normally use INSTALL to install new software, run IPSetup

and uncheck the "Use DSM/SCM" box, to allow IPSetup to move the

NonStop(TM) Kernel files to the correct ISVs.

If TCP/IP and FTP are unavailable, or if you have problems

with automatic file placement, use the instructions in the

IPSetup User Guide section "Manual Software Placement Using

the IPSetup TACL Program" to manually place NonStop(TM) Kernel

file:///C|/Jolt12/ReadmeJolt12.txt

file:///C|/Jolt12/ReadmeJolt12.txt (1 of 8) [4/27/2004 10:35:04 AM]

Summary of content (8 pages)

PAGE 1
file:///C|/Jolt12/ReadmeJolt12.txt READ THIS FILE COMPLETELY BEFORE BEGINNING PRODUCT INSTALLATION Copyright 2000 Compaq Computer Corporation Product Name: Compaq Jolt for NonStop(TM) TUXEDO (R1.
PAGE 2
file:///C|/Jolt12/ReadmeJolt12.txt files. Note: Compaq recommends that you move/copy the files by using either DSM/SCM or IPSetup for each distribution CD in the NonStop(TM) TUXEDO product set (NonStop(TM) TUXEDO core services, the Administrator, Jolt components, and LLE components) to place all the files on the NonStop(TM) Himalaya system. Then run Install.sh to install all the components at once, rather than installing them sequentially.
PAGE 3
file:///C|/Jolt12/ReadmeJolt12.txt was copied to during step 2. 5. Turn on execute permission to Install.sh (for example, chmod +x Install.sh). 6. Execute the Install.sh script and follow the directions. Select the jolt and joltdoc packages. Answer the Install.sh script questions as follows: a. For the location of the files (which are the NonStop(TM) TUXEDO PAX files that IPSetup placed in the ZOSSUTL ISV), type an OSS pathname--for example, /G/system/zossutl. b.
PAGE 4
file:///C|/Jolt12/ReadmeJolt12.txt 8. A new sample application, called tradeapp, is now included in the product. After installation, the files for this sample application will be in the subdirectory /tuxedoR6.5/apps/tradeapp. For more information, refer to the README file within the tradeapp subdirectory. Note that in Section C, Step 5, in the README file within the tradeapp subdirectory, the reference to tradeapp.mk should be tradeapp.mak. The test target in the tradeapp.
PAGE 5
file:///C|/Jolt12/ReadmeJolt12.txt T0444D46 - Compaq Jolt for NonStop(TM) TUXEDO Docs VII. CD-ROM Root Directory Contents AUTORUN.INF File containing CD AutoRun commands Install.sh File containing the NonStop(TM) TUXEDO installation script used after IPSetup had been successfully executed. IPSETUP.CNT File containing help contents for the CD installation utility IPSetup. IPSETUP.EXE File containing the main executable for IPSetup. IPSETUP.HLP File containing help text for IPSetup. LICENSE.
PAGE 6
file:///C|/Jolt12/ReadmeJolt12.txt JoltBeans to your Java development environment. A Windows NT 4.0 machine with IIS 4.0 installed (included with Windows NT Option Pack 4). Required to use the machine as a Web server to use ASP connectivity for Jolt. Refer to the README file in the Jolt asp bankapp example for installation instructions. Any webserver with servlet execution support to use servlet connectivity for Jolt. Refer to the README file in the Jolt servlet examples for installation instructions. IX.
PAGE 7
file:///C|/Jolt12/ReadmeJolt12.txt textField by setting the input value of the service as text from the contents of the textField. -The following generated code was expected: joltServiceBean1.setInputTextValue("FIELDNAME", textField1.getText()); -Instead the following incorrect code is generated: joltServiceBean1.setInputTextValue(textField1.getText(), textField1.
PAGE 8
file:///C|/Jolt12/ReadmeJolt12.txt service input value is set, before the service call is made. code is: Sample service1=new JoltServiceBean(); service1.setServiceName("SERVICEX"); for (int i=0;i< 10;i++) { service1.setInputTextValue("FIELD",i,"10"); } int occur1=service1.getOccurrenceCount("FIELD"); service1.callService(); /* service modified "FIELD" and return the same number * of occurrences */ int occur2=service1.getOccurrenceCount("FIELD"); The expected value of occur1 is 10, the actual value is 0.