Jolt 1.2 Readme

was copied to during step 2.
5. Turn on execute permission to Install.sh (for example,
chmod +x Install.sh).
6. Execute the Install.sh script and follow the directions. Select
the jolt and joltdoc packages. Answer the Install.sh script
questions as follows:
a. For the location of the files (which are the NonStop(TM) TUXEDO
PAX files that IPSetup placed in the ZOSSUTL ISV), type an
OSS pathname--for example, /G/system/zossutl.
b. For the location of the Jolt subdirectories, Compaq recommends
that you accept the default values.
7. After completion of the Install.sh script, the directory
/tuxedoR6.5/udataobj/jolt/joltrly/ contains jrly executables for
the following platforms:
Platform Subdirectory Name
-------- -----------------
HP/UX 1010 HP/hp1010/jolt/
HP/UX 1020 HP/hp1020/jolt/
IBM AIX IBM/aix421/jolt/
Sun Solaris v2.51 (SPARC version) Sun5x/sol251/jolt/
Sun Solaris v2.6 (SPARC version) Sun5x/sol26/jolt/
Microsoft Windows 95 Win32/udataobj/jolt/relay/
Microsoft Windows 98 Win32/udataobj/jolt/relay/
Microsoft Windows NT 4.0 Win32/udataobj/jolt/relay/
For example, the location of the .Z executable for HP/UX 1020 is
/tuxedoR6.5/udataobj/jolt/joltrly/HP/hp1020/jolt/joltrly.Z.
For Windows 95, Windows 98, and Windows NT 4.0, the indicated
subdirectory contains the jrly.exe, jrly.config, and copyright
files. The same files run on all three Windows platforms.
For all other platforms, the indicated subdirectory contains the
joltrly.Z and copyright files.
a. For platforms other than Windows, use the ftp command to copy
the joltrly.Z file (in binary format) to the desired platform.
Uncompress the joltrly.Z file by using the following commands
at the UNIX system prompt:
cd <same directory as joltrly.Z>
uncompress < joltrly.Z | cpio -icdumv
These commands place the following files in the current
subdirectory:
relay/jrly
relay/jrly.config
c. For all platforms, modify the connect parameter in the
jrly.config file to specify the IP address and port number of
the JRAD process on the NonStop(TM) Kernel host system.
d. Now you can run the jrly executable file.
file:///C|/Jolt12/ReadmeJolt12.txt
file:///C|/Jolt12/ReadmeJolt12.txt (3 of 8) [4/27/2004 10:35:04 AM]