JToolkit Readme

ManualsBrandsHP ManualsServerHP NonStop G-Series

READ THIS FILE COMPLETELY BEFORE BEGINNING PRODUCT INSTALLATION

Product Name: HP JToolkit for NonStop(TM) Servers

Product ID: SJ76V2

Component Products: T2716AAC NonStop Java JToolkit

I. Basic Product Installation Instructions

1. Read the Limited Use Software License Agreement in the ASCII file

LICENSE.TXT.

2. Ensure that the requirements for using this product are met.

(see Section IV Product Requirements below)

3. Ensure that the prerequisites for the installation utility and

any product-specific installation requirements are met.

(see Section V Installation Prerequisites below)

IMPORTANT: Always reinstall this product after using the HP

Install product to install an Release Version Update (RVU).

Installing an RVU using the Install product can result in

overwriting this Independent Product with older versions of

the software.

4. Review the file USRGUIDE.PDF (in the subdirectory NSK_SW on this

CD) containing the IPSetup User's Guide, which provides instructions

for using IPSetup, an utility provided on the CD that enables

installation of Independent Products. You need Adobe Acrobat Reader

(available on this CD) to read or print the IPSetup User's Guide.

5. Decide whether you will use DSM/SCM to move files to Installation

Subvolumes (ISVs) after files are placed on the NonStop system.

Using DSM/SCM is optional, but is recommended when DSM/SCM is

available.

6. Follow the pre-installation instructions in Section II below, if

any, before continuing to Step 7.

7. Run IPSetup to place the product files on the NonStop system.

Refer to section VIII for step by step instructions on moving

the product files from the workstation to the NonStop system

by using IPSetup.

If you encounter problems during IPSetup operations, follow the

instructions in section IX to manually place the product files.

If you have problems with automatic file placement, use the

instructions in the IPSetup User's Guide section "Manual Software

Placement Using FTP & SETUPRUN" to manually place NonStop Kernel files.

8. Follow the post-installation instructions in Section III below, if

any, after using IPSetup to place and install this product.

II. Pre-Installation Instructions

None

file:///C|/Documents and Settings/bkerr/Desktop/JToolkitreadme.txt

file:///C|/Documents and Settings/bkerr/Desktop/JToolkitreadme.txt (1 of 6) [1/28/2005 3:16:18 PM]

Summary of content (6 pages)

PAGE 1
file:///C|/Documents and Settings/bkerr/Desktop/JToolkitreadme.txt READ THIS FILE COMPLETELY BEFORE BEGINNING PRODUCT INSTALLATION Copyright 2004 HP Product Name: HP JToolkit for NonStop(TM) Servers Product ID: SJ76V2 Component Products: T2716AAC NonStop Java JToolkit I. Basic Product Installation Instructions 1. Read the Limited Use Software License Agreement in the ASCII file LICENSE.TXT. 2. Ensure that the requirements for using this product are met. (see Section IV Product Requirements below) 3.
PAGE 2
file:///C|/Documents and Settings/bkerr/Desktop/JToolkitreadme.txt III. Post-Installation Instructions Once the product files have been successfully moved to the DSV locations on the NonStop system by, using IPSetup or Manual Software Placement by using the IPSetup TACL program, follow the installation instructions in the product SOFTDOC to complete the product installation. IV. Product Requirements Required Hardware: NonStop S-series server with processors that provide IEEE floating point support.
PAGE 3
file:///C|/Documents and Settings/bkerr/Desktop/JToolkitreadme.txt Required Software: T9550D30 SOCKET LIBRARY or higher version T9552D30 TCP/IP FTP with SPR ABG or superseding SPR (for releases D31.00 to D40.00) T9552D40 TCP/IP FTP with SPR ABJ or superseding SPR (for releases D40.01 and higher) Microsoft Windows 95, or Windows NT 4.0 or later Microsoft TCP/IP stack and FTP client VI. Manuals Included On this CD 527489-003 HP JToolkit for NonStop Servers Programmer's Reference VII.
PAGE 4
file:///C|/Documents and Settings/bkerr/Desktop/JToolkitreadme.txt C) Click the "Run IPSetup" button to launch IPSetup. The program displays a Welcome Screen and a License Agreement screen. To continue the installation, click Next on each of these screens. D) If you decide to use DSM/SCM to move files to Installation Subvolumes (ISVs) after files are placed on the NonStop system, Check the option "Use DSM/SCM to complete installation on host". Uncheck this option if you do not wish to use DSM/SCM.
PAGE 5
file:///C|/Documents and Settings/bkerr/Desktop/JToolkitreadme.txt NSK_SW\TOOLS\RISC C) Navigate to the subdirectory TOOLS\RISC and use an ASCII file transfer mechanism (such as FTP) to move the file SETUPRUN to a location (such as $.R2716AAC) on the destination NonStop Kernel system. Where is the volume where the product is to be installed.
PAGE 6
file:///C|/Documents and Settings/bkerr/Desktop/JToolkitreadme.txt Correct any problems if indicated. Refer to the Troubleshooting Tips section in the USRGUIDE.PDF included in the product CD. K) Once the product files have been successfully moved to the DSV locations on the NonStop system by using SETUPRUN, follow the installation instructions in each product's softdoc to complete the product installation. file:///C|/Documents and Settings/bkerr/Desktop/JToolkitreadme.