JToolkit Readme

III. Post-Installation Instructions
Once the product files have been successfully moved to the
DSV locations on the NonStop system by, using IPSetup or Manual
Software Placement by using the IPSetup TACL program, follow
the installation instructions in the product SOFTDOC to
complete the product installation.
IV. Product Requirements
Required Hardware:
NonStop S-series server with processors that
provide IEEE floating point support. This excludes
S700 and S70000 processors.
Minimum OS RVU:
NonStop Kernel RVU G06.20 or later.
Required Software:
T2766V10 HP NonStop Server for Java 4 or above
The following product is required if you are using the Pathsend API
for Java or wish to run Java as a Pathway server:
T8344D44 TS/MP Pathmon
The following product is required if you are using the Pathsend API
for Java:
T8345D44 TS/MP Pathsend
The following product is required if you are using the SIP feature
of JToolkit:
T0470G06 TCP/IP MONITOR PROCESS (NOTE)
T0468G06 TCP/IP MANAGER PROCESS (NOTE)
T0471G06 TCP/IP SOCKET PROVIDER (NOTE)
T0469G06 TCP/IP SRL (NOTE)
T1265G06 TCP/IPV6 SUBSYSTEM (NOTE)
T1266G06 TCP/IPV6 MANAGER PROCESS (NOTE)
NOTE: This SPR requires either a)the four T04xx PVs
or b)the two T12xx PVs
Disk Space Requirement:
10 MB (NonStop System)
V. Installation Prerequisites
Required Hardware:
HP NonStop Server
Communications controller allowing file transfer
from PC to HP NonStop Server
PC with 486 or higher processor and all of the following:
CD-ROM drive
VGA or higher-resolution video adapter and monitor
Microsoft Mouse or similar pointing device
Communications controller allowing file transfer
from PC to HP NonStop Server
file:///C|/Documents and Settings/bkerr/Desktop/JToolkitreadme.txt
file:///C|/Documents and Settings/bkerr/Desktop/JToolkitreadme.txt (2 of 6) [1/28/2005 3:16:18 PM]