JToolkit Readme
C) Click the "Run IPSetup" button to launch IPSetup. The
program displays a Welcome Screen and a License Agreement
screen. To continue the installation, click Next on each
of these screens.
D) If you decide to use DSM/SCM to move files to Installation
Subvolumes (ISVs) after files are placed on the NonStop system,
Check the option "Use DSM/SCM to complete installation on host".
Uncheck this option if you do not wish to use DSM/SCM.
Using DSM/SCM is optional, but is recommended when DSM/SCM is
available.
E) On the "Product Selection" screen, highlight the product to be
installed from the available product list and click Add to
select the product:
HP JToolkit for NonStop Servers
Click Next.
F) Log on with an userid that has required permissions, by
following the instructions on the "Host Information"
screen. You can use either the system name or the system
IP address to log on. Click Next.
G) On the "Host Target Settings" screen, you can either accept
the default locations for the Work subvolume and Backup
subvolume or browse the locations of your choice.
Click Next.
H) On the "Host File Placement" screen, you can either accept
the default disk locations or browse to locations of your
choice. Click Next.
I) On the "Placement Manifest" screen, review the file
locations. You can click the Back button to go back and
change them. Click Next.
J) On the "Placement Complete" screen, you can choose the
check box to view the release documentation. It is
recommended that you should review the release
documentation. Click Finish to complete running the
IPSetup.
K) Once the product files have been successfully moved to
the DSV locations on the NonStop system by using IPSetup,
follow the installation instructions in product softdoc
to complete the product installation.
IX. Manual placement of product files
NOTE: Skip this step if IPSetup has successfully placed the
files onto your NonStop Kernel system.
A) Navigate to the subdirectory NSK_SW on the CD-ROM.
B) The files you need to move, including SETUPRUN and NSKUNPK,
as well as the IPSetup readme file are located on your
IP CD-ROM in the following directory:
file:///C|/Documents and Settings/bkerr/Desktop/JToolkitreadme.txt
file:///C|/Documents and Settings/bkerr/Desktop/JToolkitreadme.txt (4 of 6) [1/28/2005 3:16:18 PM]