JToolkit Readme

NSK_SW\TOOLS\RISC
C) Navigate to the subdirectory TOOLS\RISC and use an ASCII file
transfer mechanism (such as FTP) to move the file SETUPRUN to
a location (such as $<vol>.R2716AAC) on the destination
NonStop Kernel system.
Where <vol> is the volume where the product is to be installed.
D) Move the files NSKUNPK and FILEMGR in this subdirectory
by using a BINARY file transfer mechanism (such as FTP) to
the same location in which you placed SETUPRUN.
E) The product files are located in the directory NSK_SW\SJ76V2\RISC.
Navigate to the product subdirectory and move all the files
in this subdirectory by using a BINARY file transfer mechanism
(such as FTP) to the same location in which you placed SETUPRUN.
F) Logon to the NonStop system as SUPER.SUPER:
TACL> LOGON SUPER.SUPER
G) Go to the subvolume containing the transferred files and
run SETUPRUN TACL macro:
TACL> VOLUME <$volume>.<subvolume>
TACL> SETUPRUN
SETUPRUN performs the following tasks:
1. Runs NSKUNPK, which transforms each packed file back
to its DSV format.
2. Creates a DSVLOCS file, which contains a list of
locations where each DSV was placed.
3. Purges the packed file after successful placement.
NOTE: You must restore a packed DSV in its entirety;
you cannot restore only some of the files.
H) Enter N when SETUPRUN prompts for renaming the DSV
locations:
Do you want to rename any of the DSVs that were
placed (Y/N)?N
I) SETUPRUN indicates if it completed successfully.
If all files were unpacked successfully, SETUPRUN
displays the following message before it finishes:
------------------------------------------
-- ALL FILES HAVE BEEN CORRECTLY PLACED --
------------------------------------------
If not all files were unpacked successfully, SETUPRUN
displays the following message before it finishes:
----------------------------------------------------
-- xxxx OF xxxx PACKAGES WERE SUCCESSFULLY PLACED --
----------------------------------------------------
file:///C|/Documents and Settings/bkerr/Desktop/JToolkitreadme.txt
file:///C|/Documents and Settings/bkerr/Desktop/JToolkitreadme.txt (5 of 6) [1/28/2005 3:16:18 PM]