L700 (CTL700) Installation and User's Guide (G06.28+, H06.04+, J06.03+)
Table Of Contents
- Title Page
- Contents
- What's New
- About This Manual
- 1 Overview of the Tape Library
- 2 Unpacking the Tape Library
- 3 Installing the Tape Library
- 4 Controls and Indicators on the CTL700 Tape Library
- 5 Configuring and Testing the Tape Library
- Overview of Configuration
- Tape Library Capacity
- Entering Configuration Data
- Performing the Final Steps
- Initialization Sequence
- Testing the Tape Library
- 6 Operating the Tape Library
- Operating in Automated Mode
- Powering Off the Tape Library
- Operating In Manual Mode
- 7 Tape Drives in the CTL700 Tape Library
- 8 Configuring the CTL700 Tape Library for the NonStop SSeries Server
- 9 Managing Tape Drives
- A Configuring the CTL700 Tape Library for the NonStop NS-Series Server
- B Configuring the CTL700 Tape Library for the NonStop SSeries Server With the IOAM Enclosure
- C Configuring the CTL700 Tape Library for the NonStop BladeSystem Server
- Safety and Compliance
- Index
Hewlett-Packard Company—527338-008
i
L700 (CTL700) Installation and
User’s Guide
Glossary Index Examples Figures Tables
What’s New in This Manual vii
Manual Information vii
New and Changed Information vii
About This Manual ix
Supported Products and Features ix
Notation Conventions ix
1. Overview of the Tape Library
CTL700 Tape Library Product Overview 1-1
Tape Drives 1-2
Power System 1-3
AC Power Distribution Units 1-3
DC Power Supplies 1-3
Compatibility 1-3
Software 1-4
2. Unpacking the Tape Library
Overview 2-1
Required Tools
2-1
Planning Location 2-3
Physically Unpacking the Tape Library
2-4
Removing the Tape Library From the Pallet
2-6
Positioning the Tape Library
2-6
Removing the Shipping Kit
2-6
Securing the Tape Library Position
2-7
Unpacking the Tape Library Interior
2-7
3. Installing the Tape Library
Installing the Expansion Frame 3-1
Tape Library Operating Options 3-6
Installing Cables 3-7
SCSI Cable Paths 3-7