LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem
LAN Configuration and Management Manual—520469-012
4-41
INFO Command
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
LIF lif-name
is the name of the LIF to be deleted. The LIF name has the form $ZZLAN.lif-name,
for example, $ZZLAN.L11123B.
Considerations

The LIF must be in the STOPPED state and have no registered clients before it
can be deleted.

You cannot use a wild-card character in the name of the LIF when using the
DELETE LIF command.
Example
The following example deletes the LIF named L11123B from the SLSA subsystem:
DELETE LIF $ZZLAN.L11123B
INFO Command
INFO is a nonsensitive command that displays the configured settings for the specified
object. An asterisk (*) next to a field in the display indicates that the attribute is
alterable.
INFO ADAPTER Command
The INFO ADAPTER command displays information about all adapters in a system or
about a specific adapter.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
DELETE [ /OUT file-spec/ ] LIF lif-name
INFO [/OUT
file-spec/ ] ADAPTER adapter-name
[ , DETAIL | OBEYFORM ]