LAN Configuration and Management Manual

SCF Commands for the SLSA Subsystem
LAN Configuration and Management Manual—520469-012
4-42
INFO ADAPTER Command
ADAPTER adapter-name
is the name of the adapter for which information is to be displayed.
DETAIL
causes the INFO command to display a list of detailed information about the
adapter. Without this parameter, the command displays only type, group, module,
and slot information.
OBEYFORM
causes the INFO command to display the information about the adapter in the form
of ADD ADAPTER commands, so you can use the information to create the
adapter’s configuration.
Considerations

The INFO ADAPTER with the DETAIL option displays blank fields for
board-specific information when the physical CRU or CRU information is missing.

Access-list information is displayed when you specify the OBEYFORM option as
place-holder information. For the actual access-list information in ACCESSLIST
(and other SAC attributes), you must use INFO SAC, OBEYFORM.
INFO ADAPTER Display
The display for the INFO ADAPTER command without the DETAIL option is:
The display for the INFO ADAPTER command with the DETAIL option is:
-> INFO ADAPTER $ZZLAN.*
Name Group Module Slot Type
$ZZLAN.CC1 21 1 54 CCSA
$ZZLAN.E0154 1 1 54 E4SA
$ZZLAN.F0153 1 1 53 FESA
$ZZLAN.G11123 111 2 3 G4SA
$ZZLAN.M0IE1 1 1 55 MIOE
$ZZLAN.M0IE0 1 1 50 MIOE
INFO ADAPTER $ZZLAN.G11123, DETAIL
SLSA Detailed Info ADAPTER \SYS.$ZZLAN.G11123
Board Partnum........... 527431-001
Board Revision.......... A01-01
Board Serial Number..... MP0005
Board TNum.............. LG4a
Group................... 110
Module.................. 2
Slot.................... 3
Type.................... G4SA